Generac Power Systems PWRcell X11400 Series, Руководство по установке

Страница: 17 / 40

Electrical Connections
Installation Manual for Generac PWRCell Inverter 13
Section 5: Electrical Connections
Generac PWRcell Inverter Wiring Compartment
A
B
C
L
K
J
I
H
G
F E
D
Figure 5-1. Generac PWRcell Inverter Wiring Compartment
A REbus bi-directional DC terminals G Authorized Generac personnel only
B Internet connection H REbus Beacon port
C DC main fuses I Protected loads breaker
D Current Transformers (CTs) accessory port J AC grid connection terminals
E Automatic Transfer Switches (ATs) accessory port K Protected loads terminals
F External safety shutdown switch terminal L Grounding bar
Accessing Wiring Compartment
(000600)
DANGER
Electrocution. Initiate a system-wide safety shutdown
and turn PWRcell Disconnect Switch OFF on all
connected batteries before performing service. Failure
to do so will result in death, serious injury, equipment
and property damage.
(000642)
DANGER
Electrocution. Verify all system voltages are safe before
wiring. Disconnect all AC and DC sources of power before
touching terminals. Failure to ensure no dangerous voltages
are present on conductors and terminals before wiring
will result in death or serious injury.
To access the wiring compartment:
1. Initiate a Safety Shutdown and allow DC voltage to
drop to a safe level.
2. Power down inverter
3. Disconnect all sources of AC and DC Power.
4. See Figure 5-2 . Open inverter front cover by lifting
the bottom to horizontal (A) and pushing inward (B).
5. Locate wiring compartment cover (C).
6. Remove five M4X10 screws (D) and wiring
compartment cover.
B
009994
A
D
C
Figure 5-2. Wiring Compartment