Generac Power Systems DF7500, Руководство пользователя

Страница: 5 / 28

Owner’s Manual for DF 7500 Dust Suppression System 1
Introduction and Safety
Section 1: Introduction and Safety
Introduction
Tha nk you for purcha s ing a Ge ne ra c Mobile P roducts LLC
product. This unit ha s be e n de s igne d to provide high
pe rforma nce , e fficie nt ope ra tion, a nd ye a rs of us e whe n
ma inta ine d prope rly.
The information in this manual is accurate based on
products produced at the time of publication. The manu-
facturer reserves the right to make technical updates,
corrections, and product revisions at any time without
notice.
Read This Manual Thoroughly
If any section of this manual is not understood, contact your
nearest Generac Mobile Products Authorized Service Dealer
(ASD), or contact
Generac Mobile Products Technical Service
at 1-800-926-9768 or www.generacmobileproducts.com
with any questions or concerns.
The owner is responsible for proper maintenance and safe
use of the equipment. Comply with regulations the Occu-
pational Safety and Health Administration (OSHA) has
established, or with equivalent standards. Also, verify that
the unit is applied, used, and maintained in accordance with
the manufacturer's instructions and recommendations. Do
nothing that might alter safe application/usage and render
the unit in noncompliance with the aforementioned codes,
standards, laws, and regulations.
Save these instructions for future reference. This manual
contains important instructions for the unit that should be
followed during setup, operation and maintenance of the
unit and battery. ALWAYS supply this manual to any indi-
vidual that will use this machine.
How to Obtain Service
When the unit requires servicing or repairs, contact an
ASD for assistance. Service technicians are factory-
trained and are capable of handling all service needs. For
assistance locating a dealer, go to
https://www.gener-
acmobileproducts.com/parts-service/find-service .
When contacting an ASD about parts and service, always
supply the complete model and serial number of the unit
as given on the data decal located on the unit. Record
the model and serial numbers in the spaces provided on
the front cover of this manual.
Safety Rules
The manufacturer cannot anticipate every possible circum-
stance that might involve a hazard. The warnings in this
manual, and on tags and decals affixed to the unit are,
therefore, not all inclusive. If using a procedure, work
method or operating technique that the manufacturer does
not specifically recommend, verify it is safe for others. Also
make sure the procedure, work method or operating tech-
nique utilized does not render the equipment unsafe.
Safety Symbols and Meanings
Throughout this publication, and on tags and decals affixed
to the unit, DANGER, WARNING, CAUTION and NOTE
blocks are used to alert personnel to special instructions
about a particular operation that may be hazardous if
performed incorrectly or carelessly. Observe them care-
fully. Their definitions are as follows:
NOTE: Notes contain additional information important to
a procedure and will be found within the regular text of
this manual.
These safety alerts cannot eliminate the hazards that they
indicate. Common sense and strict compliance with the
special instructions while performing the action or service
are essential to preventing accidents.
(000100a)
WARNING
Consult Manual. Read and understand manual
completely before using product. Failure to
completely understand manual and product
could result in death or serious injury.
(000001)
DANGER
Indicates a hazardous situation which, if not avoided,
will result in death or serious injury.
(000002)
WARNING
Indicates a hazardous situation which, if not avoided,
could result in death or serious injury.
(000003)
CAUTION
Indicates a hazardous situation which, if not avoided,
could result in minor or moderate injury.