Generac Power Systems 1067-0, Руководство пользователя, Страница: 8 / 20

Generac 1500PSI High Pressure Washer
GENER
A
C A A
S SS SE EM MB BL L
Y Y
8
H i g h P r e s s u r e W a s h e r
• Attach nozzle extension to spray gun by aligning
the locking tabs on the extension with the grooves
in the gun. Push extension inward and twist clock-
wise to lock in place (Figure 9).
• Scew on the adjustable nozzle to the nozzle exten-
sion. Tighten until it locks.
CHECKLIST BEFORE
STARTING ENGINE
If you have reached this point, look back over the
assembly to see if you have performed all of the fol-
lowing.
• Check for properly tightened hose connections
(high pressure and water supply) and for tight con-
nections and that there are no kinks, cuts, or
damage to the high pressure hose.
• Check that oil has been added to proper level in
engine crankcase before trying to start the pressure
washer.
• Add proper gasoline to fuel tank.
• Provide proper water supply (not to exceed 140°F).
• Be sure to read “Safety Rules” and “Operation sec-
tions before using the pressure washer.
Figure 9 — Connect nozzle extension to spray
gun.