manualshive.com logo in svg

Generac Power Systems 005230-0, Руководство пользователя

Поделиться
Скачать
Generac Power Systems 005230-0 Скачать руководство пользователя страница 10

SPECIFICATIONS

STATIONARY EMERGENCY GENERATOR

 

‹

Type ............................................................................. Synchronous
Rotor Insulation ................................................................... Class H
Stator Insulation .................................................................. Class H
Total Harmonic Distortion ..........................................................<5%
Telephone Interference Factor (TIF) ..........................................< 50
Alternator Output Leads 1-phase ........................................... 4-wire
Bearings .........................................................................Sealed Ball
Coupling .......................................................................Flexible Disc
Load Capacity (Standby Rating) ............................................30kW*

*  NOTE: Generator rating and performance in accordance with ISO8528-5, BS5514, SAE J1349, 

ISO3046 and DIN 6271 Standards. KW rating is based on LPG fuel and may derate with natural 

gas.

Excitation System ....................................................................Direct
Generator Output Voltage/kW - 60 Hz 

kW 

Amp 

CB Size

  120/240V, 1-phase, 1.0 pf 

30 

125 

150

  Generator Locked Rotor KVA Available @ Voltage Dip of 35%
  Single-phase (30kW) ..................................................... 63/90 KVA

ENGINE

 

‹

Make ................................................................................... Generac
Cylinders and Arrangement ................................................ 6, V-type
Displacement ....................................................................... 4.2  Liter
Bore .....................................................................96.8 mm (3.81 in.)
Stroke .....................................................................95 mm (3.74 in.)
Compression Ratio .............................................................9.35-to-1
Air Intake System ...............................................Naturally Aspirated
Valve Seats ......................................... Precision Ground, Hardened
Lifter Type ...............................................................Roller, Hydraulic

Engine Parameters

Rated Synchronous RPM ..............................................60 Hz, 1800
HP at rated kW (30kW) ................................................................ 48

Exhaust System

Exhaust Flow at Rated Output 60 Hz (30kW) ..................... 260 cfm
Exhaust Temp. at Rated Output (30kW) ................................ 850° F

Combustion Air Requirements (Natural Gas)

Flow at rated power, 60 Hz (30kW) ....................................... 90 cfm

Governor

Type .................................................................................. Electronic
Frequency Regulation ...................................................Isochronous
Steady State Regulation ......................................................± 0.25%

Engine Lubrication System

Type of Oil Pump ...................................................................... Gear
Oil Filter ............................................... Full Flow Spin-on, Cartridge
Crankcase Oil Capacity ...............................................4.73 U.S. qts.

COOLING SYSTEM

 

‹

Type ...................................................Pressurized Closed Recovery
Water Pump .................................................................... Belt Driven
Fan Speed .........................................................................1300 rpm
Fan Diameter .....................................................................22 inches
Fan Mode ................................................................................ Puller
Air Flow (inlet air including alternator and
  combustion air) ...........................................................2460 ft

3

/min.

Coolant Capacity ............................................. 21.6 L (5.7 U.S. gal.)
Heat Rejection to Coolant (30kW) ..............................107,000 Btu/h
Maximum Operating Air Temp. on Radiator ..............60° C (150° F)
Maximum Ambient Temperature ................................50° C (140° F)

FUEL SYSTEM

 

‹

Type of Fuel ......................................... Natural Gas, Propane Vapor
Carburetor ...................................................................... Down Draft
Secondary Fuel Regulator .................................................Standard
Fuel Shut-off Solenoid ........................................................Standard
Operating Fuel Pressure  ...................... 5 in. - 14 in. Water Column

Fuel Consumption - ft

3

/hr (Natural Gas/LPV)

 Exercise 

25% 50% 75% 100%

 Cycle 

Load 

Load 

Load 

Load

30kW 104/50  122/49  233/93  335/133  417/166

ELECTRICAL SYSTEM

 

‹

Battery Charge Alternator ............................................12V, 30 Amp
Static Battery Charger ............................................................2 Amp
Recommended Battery .....................................Group 24F, 525CCA
System Voltage .....................................................................12 Volts

Voltage Regulator

Type .................................................................................. Electronic
Sensing ........................................................................ Single-phase
Regulation ................................................................................± 1%
Features .................... V/F Adjustable, Adjustable Voltage and Gain

Power Adjustment for Ambient Conditions

Temperature Deration
  3% for every 10° C above °C (30kW) ........................................ 40
  1.65% for every 10° above °F (30kW) ..................................... 104
Altitude Deration
  1% for every 100 m above m (30kW) .................................... 1220
  3% for every 1000 ft. above ft. (30kW) ................................... 4000

Controller ...................................... H-100  Series

6-1

Stationary Emergency Generator

Specifications

GenSpec043  Rev.

 C  10/08

Содержание 005230-0

























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды