Generac Portable Products 1295-0, Руководство пользователя

Страница: 13 / 24

13
Generac Portable Products 3200PSI High Pressure Washer
• Apply a high pressure spray to a small area and
then check the surface for damage. If no damage is
found, you can assume it is okay to continue
cleaning.
• Start at the top of the area to be rinsed, working
down with same overlapping strokes as you used
for cleaning.
Automatic Cool Down System
(also known as Thermal Relief)
If you run the engine on your pressure washer for 3–5
minutes without pressing the trigger on the spray gun,
circulating water in the pump can reach a temperature
between 140–145°F. When the water reaches this
temperature, the automatic cool down system
engages and cools the pump by discharging the
warm water onto the base and ground. This
system prevents internal damage to the pump.
GENERAL MAINTENANCE
RECOMMENDATIONS
The warranty of the high pressure washer does not
cover items that have been subjected to operator
abuse or negligence. To receive the full value from
the warranty, the operator must maintain the high
pressure washer as instructed in this manual.
• Some adjustments will need to be made periodically
to properly maintain your high pressure washer.
• All adjustments in the Service and Adjustments
section of this manual should be made at least once
each season.
• Once a year you should clean or replace the spark
plug and clean or replace the air filter and check the
gun and wand assembly for wear. A new spark plug
and clean air filter assure proper fuel–air mixture
and help your engine run better and last longer.
Before Each Use
• Check engine oil level.
• Check water inlet screen for damage.
• Check high pressure hose for leaks.
• Check chemical injection tube and filter for damage.
• Check gun and nozzle extension assembly for
leaks.
• Rinse out garden hose to flush out debris.
PRESSURE WASHER
MAINTENANCE
Check and Clean Inlet Screen
Examine the screen on the water inlet. Clean it if the
screen is clogged or replace it if screen is damaged.
Figure 14 — Pressure Control Knob
Pressure
Control Knob