Generac 2250PSI High Pressure Washer
GENER
A
C
The Reliable Ones
6
A
SSEMBL
Y
Read entire owners manual before you attempt to
assemble or operate your new pressure washer.
Your new pressure washer has been assembled at
the factory with the exception of those parts left
unassembled for shipping purposes.
REMOVE PRESSURE
WASHER FROM CARTON
Remove parts box included with pressure washer.
Slice two corners at guide handle end of carton
from top to bottom so the panel can be folded down
flat, then remove all packing material.
Roll pressure washer out of carton.
CARTON CONTENTS
Items in the carton include:
Main Unit
Manual Bag Contents
Manual
O-Ring Kit
Nozzle Cleaning Kit
Parts Box (which includes the following):
Video
Wireform
Goggles
Owners Manual
Engine Manual
Spray Gun
Nozzle Extension
High Pressure Hose
Handle
Parts Bag (which includes the following):
2 carriage bolts
2 knobs
If any of the above parts are missing or damaged, call
the Pressure Washer Helpline at
18002701408.
PREPARING THE PRESSURE
WASHER FOR USE
If you have any problems with the assembly of your
pressure washer or if parts are missing or damaged,
call the Pressure Washer Helpline at
1-800-270-1408.
To prepare your pressure washer for operation you
will need to perform these tasks:
Attach the handle and attach the wire form that
holds the high pressure hose and spray gun.
Connect the high pressure hose to the spray gun
and the pump and connect water supply to the
pump.
Add oil to engine crankcase.
Add fuel to fuel tank.
Attach the Handle
Place the handle onto the handle supports already
connected to the main unit. Make sure the holes in
the handle align with the holes on the handle
supports. (Figure 1)
Note:
It may be necessary to move the handle
supports from side to side in order to align the handle
so it will slide over the handle supports.
Figure 1 — Attach the handle to the handle
supports.
Make sure
the holes on
the handle
are aligned
with the
holes on the
handle
supports
Handle
Handle
Supports
