Generac Portable Products 005366-6, Руководство пользователя

Страница: 14 / 60

12
Section 4 – Maintenance
Standby Generator Set
4.1 SERVICE SCHEDULE
4.1.1 AUTHORIZED OPERATOR
MAINTENANCE FUNCTIONS
4.1.1.1 Every Month or 100 Hours
(whichever comes first)
• Test standby generator system.
• Inspect battery (batteries) and cables.
• Check engine oil level.
• Check gearbox oil level (if so equipped).
• Check engine coolant level.
• Check generator ground connections.
• Test/inspect starting aids.
4.1.1.2 Every Three Months or Every 120
Hours
(whichever comes first)
• Inspect and test fuel system and connections.
• Inspect exhaust system.
• Inspect/test fuel supply system.
4.1.2 AUTHORIZED SERVICE TECHNICIAN
MAINTENANCE FUNCTIONS
4.1.2.1 After First 30 Hours of Operation
• Inspect wiring.
• Change engine crankcase oil and oil filter.
• Inspect engine fan belts.
• Inspect battery (batteries) and cables.
4.1.2.2 Every Six Months or Every 200 Hours
(whichever comes first)
• Change engine oil and filter.
• Lubricate engine controls.
• Service engine air cleaner.
• Service engine fuel filter.
• Inspect AC generator.
• Test engine safety controls.
• Inspect fan belts.
• Check engine coolant level.
• Inspect engine cooling system hoses.
• Check optional starting aids.
• Check battery (batteries).
• Check electrical connections.
• Check/test annunciator panel.
• Perform operational test.
The following
MUST be performed by an Authorized
John Deere Dealer ONLY.
• Check engine compression.
‹


‹


4.1.2.3 Annually or Every 600 Hours
(whichever comes first)
• Inspect all wiring.
• Test engine starter operation.
• Drain water from fuel tank.
• Retorque fan bolts.
• Drain and refill gearbox (If so equipped.)
The following
MUST be performed by an Authorized
John Deere Dealer ONLY.
• Check engine valve clearance.
• Test fuel injection nozzles.
• Test injection timing.
4.1.2.4 Every Two Years
• Replace all rubber hoses.
• Replace engine fan belts.
• Inspect the Standby Generator System.
• Drain, flush, refill cooling system.
4.1.2.5 Every 1,000 Operating Hours
• Retorque engine mounting brackets.
The following
MUST be performed by an Authorized
John Deere Dealer ONLY.
• Inspect engine DC alternator.
• Inspect engine starter.
• Remove/test fuel injection pump.
• Remove/test cooling system thermostat.
4.1.2.6 As Required
• Bleed engine fuel system.
4.2 PERIODIC MAINTENANCE
A periodic program of scheduled maintenance should
be established and maintained. Such a program,
if adhered to diligently, provides added assurance
that the power system functions properly when it is
needed.
Keeping a “Maintenance Log” is highly recommended.
Such a log should be a continuous record of repairs,
parts replacements, gauge and instrument readings
during operational tests, etc.
The manufacturer recommends that a “Customer
Maintenance Inspection Agreement” be established
between the user of this equipment and the install-
ing Authorized Service Dealer. Under this agreement,
(Part No. 053263), an Authorized Service Technician
performs prestart and engine running tests and
checks at six-month and one-year intervals. Ask an
Authorized Service Dealer about this agreement.
The tasks listed in the “Service Schedule” sec-
tion cover the minimum recommended maintenance
requirements for this equipment.



