background image

Protecting the settings

The control group of the RAM1 can be 
covered with a piece of plexiglass to protect 
the settings. Attach the plexiglass over the 
switch groups with two Phillips screws when 
you have completed the adjustments. Do not 
overtighten the screws.

Status indicator LED

The status indicator LED on the RAM1 
changes colour to indicate amplifier status. 
If the LED is yellow, it indicates that the  
amplifier is in “STANDBY” mode. When the 
amplifier is switched to “ON” mode, the LED 
changes to green colour.

Automatic protection circuits

The AIW26B system has protection circuits 
against loudspeaker driver thermal overload 
and amplifier overheating. The protection 
system resets automatically so the user only 
has to turn the input level down to ensure 
that it does not reactivate.

Driver thermal overload protection 

protects the drivers from damage caused by 
prolonged overdriving with excessively high 
or distorted signal. The circuit automatically 
reduces the volume of the channel that is 
being overloaded. To avoid this, lower the 
listening volume if the sound becomes harsh 
and distorted at high sound pressure levels.

Amplifier thermal protection turns the 

amplifier to “STANDBY” mode if the amplifier 
overheats. Let the amplifier cool down and 
check that there is sufficient clearance 
around the amplifier for cooling (see chapters 
“Space requirement for the RAM1 amplifier” 
and “Mounting the RAM1 amplifier to an 
equipment rack” above). If the problem 
persists, consult your Genelec dealer or 
Home Theater Installation company for an 
improved cooling solution for your equipment 
cabinet or rack.

Maintenance

There are no user serviceable parts within 
the loudspeaker or the amplifier. Any 
maintenance or repair should only be 
undertaken by qualified Genelec service 
personnel.

Safety considerations

•  Servicing and adjustment must only be  
 

performed by qualified Genelec service  

 

personnel. Do not undo any screws on  

 

the amplifier unit.

•  It is forbidden to use this product with  
 

an unearthed power cable, which may  

 

lead to personal injury.

•  To prevent fire or electric shock, do not  
 

expose any part of the system to water  

 

or moisture. Do not place any objects  

 

filled with liquid, such as vases, on the  

 

RAM1 amplifier or near it. 

•  Switch off the mains power from the  
 

amplifier if the system is not used for  

 

long periods of time.

•  Note that the RAM1 amplifier is not  
 

completely disconnected from the AC  

 

mains service unless the mains power  

 

cable is removed from the amplifier or  

 

the mains outlet.

WARNING!

This equipment is capable of delivering Sound 
Pressure Levels in excess of 85 dB, which 
may cause permanent hearing damage.

Guarantee

This product is supplied with a two year 
guarantee against manufacturing faults or 
defects that might alter the performance of 
the unit. Refer to supplier for full sales and 
guarantee terms.

Содержание aiw26b













Отзывы: