English 5
Table 1: Suggested tone control settings for various acoustical environments
Loudspeaker Mounting Position
Treble Tilt
Bass Tilt
Flat anechoic response
OFF
OFF
Free standing in a damped room
OFF
OFF
Free standing in a reverberant room
OFF
-2 dB
Near to a wall
OFF
-4 dB
In a corner
OFF
-6 dB
tilated or sufficiently large to dissipate heat so that
the ambient temperature does not rise above 35
degrees Celsius (95°F)
Mounting options
The Genelec 4010A offers several mounting op-
tions: On the base of the loudspeaker is a 3/8”
UNC threaded hole compatible with a standard
microphone stand. On the rear, there are three
pairs of threaded holes compatible with Omni-
mount
®
, VESA, and Sanus brackets. A rigid wall
bracket provided with the 4010A allows suspend-
ing the loudspeaker on a wall in two different an-
gles. See Genelec Accessories Catalogue on
www.genelec.com for a complete list of mount-
ing hardware options.
Maintenance
There are no user serviceable parts within the loud-
speaker. Any maintenance or repair of the 4010A
should only be done by qualified service personnel.
Safety considerations
Although the 4010A has been designed in accord-
ance with international safety standards, the follow-
ing warnings should be observed to ensure safe op-
eration and to maintain the loudspeaker under safe
operating conditions:
•
Servicing and adjustment must only be
performed by qualified service personnel.
The loudspeaker must not be opened.
•
Do not expose the loudspeaker to water or
moisture. Do not place any objects filled with
liquid, such as vases on the loudspeaker or
near it.
•
This loudspeaker is capable of producing
sound pressure levels in excess of 85 dB,
which may cause permanent hearing damage.
•
Free flow of air behind the loudspeaker is
necessary to maintain sufficient cooling.
Do not obstruct airflow around the loudspeaker.
•
Note that the amplifier is not completely
disconnected from the AC mains service
unless the mains power cord is removed
from the amplifier or the mains outlet.
Guarantee
This product is guaranteed for a period of two years
against faults in materials or workmanship. Refer to
supplier for full sales and guarantee terms.
Compliance to FCC rules
This device complies with part 15 of the FCC Rules. Operation is subject
to the following conditions:
•
This device may not cause harmful interference, and
•
This device must accept any interference received, including
interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful inter-
ference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communica-
tions. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equip-
ment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
Modifications not expressly approved by the manufacturer could void
the user’s authority to operate the equipment under FCC rules.
Содержание 4010A
Страница 1: ...4010A Operating Manual ...
