Geneko GWR-I series, Руководство пользователя

Страница: 78 / 113

USER MANUAL GWR-I Cellular Router Series
78
-
Subnet Mask: 255.255.255.0
- Press Save to accept the changes.
Figure 56 - Network configuration page for GWR-I Router 2
•
Use SIM card with a static IP address, obtained from Mobile Operator. (Note the default gateway
may show, or change to, an address such as 10.0.0.1; this is normal as it is the GSM/UMTS
provider’s network default gateway).
•
Click WAN Settings Tab to configure parameters necessary for GSM/UMTS connection. All
parameters necessary for connection configuration should be required from mobile operator.
•
Check the status of GSM/UMTS connection ( WAN Settings Tab). If disconnected please click
Connect button.
•
Click VPN Settings > GRE to configure GRE tunnel parameters:
-
Enable: yes
- Local Tunnel Address: 10.10.10.2
- Local Tunnel Netmask: 255.255.255.252 (Unchangeable, always 255.255.255.252)
- Tunnel Source: 10.251.49.3 (select HOST from drop down menu if you want to use host name
as peer identifier)
- Tunnel Destination: 10.251.49.2 (select HOST from drop down menu if you want to use host
name as peer identifier)
-
KeepAlive enable: no
-
Period:(none)
- Retries:(none)
- Press ADD to put GRE tunnel rule into GRE table.
-
Press Save to accept the changes.
Figure 57 - GRE configuration page for GWR-I Router 2
•
Configure GRE Route. Click Routing on Settings Tab. Parameters for this example are:
-
Destination Network: 192.168.4.0
- Netmask: 255.255.255.0