Geneko GWR-I series, Руководство пользователя

Страница: 73 / 113

USER MANUAL GWR-I Cellular Router Series
73
SNMP Settings
Label Description
Enable SNMP
SNMP is enabled by default. To disable the SNMP agent, click this option to
unmark.
Get Community
Create the name for a group or community of administrators who can view
SNMP data. The default is
public . It supports up to 64 alphanumeric
characters.
Service Port
Sets the port on which SNMP data has been sent. The default is 161. You can
specify port by marking on user defined and specify port you want SNMP data
to be sent.
Service Access Sets the interface enabled for SNMP traps. The default is Both.
Reload Click Reload to discard any changes and reload previous settings.
Save
Click Save button to save your changes back to the GWR-I Router and
enable/disable SNMP.
Table 26 - SNMP parameters
Management - Logs
Syslog is a standard for forwarding log messages in an IP network. The term "syslog" is often used
for both the actual syslog protocol, as well as the application or library sending syslog messages.
Syslog is a client/server protocol: the syslog sender sends a small (less than 1KB) textual message to
the syslog receiver. Syslog is typically used for computer system management and security auditing. While
it has a number of shortcomings, syslog is supported by a wide variety of devices and receivers across
multiple platforms. Because of this, syslog can be used to integrate log data from many different types of
systems into a central repository.
Figure 50 - Syslog configuration page