TEXT/IMAGE MODE
Press the “TEXT” button to switch between image/text modes. To
display a text file, switch to the text mode to get a clearer text effect.
(On the remote control)
COLOR AND B&W MODE SWITCH
Press “B&W” once to enter the Black & White mode; Press again to
return to the Color mode.
SWITCHABLE VIDEO INPUTS
Press the “VIDEO” button to switch among S-Video and Video
signals.
SWITCHABLE RGB INPUTS
Use the “CCD/PC1/PC2” button to switch between CCD and different
RGB signals. Each time the “CCD/PC1/PC2” button is pressed, it
provides seamless transitions among different sources such as
Camera (CCD)
、
COMPUTER(IN)
、
and RGB (IN).
Notes: COMPUTER OUT always outputs COMPUTER IN signals.
PROJECTOR ON/STANDBY
Press the “POWER” button to turn on the visualiser’s power and
press the “Ppw” button to turn the projector power on. To turn the
projector standby after use, press the “Ppw” button more than 2
seconds, and then the projector enters to the stand-by mode. (On the
remote control, press the “PROJECTOR POWER” button)
Note: Please connect the projector RS232 cable between the
projector and the visualiser first. If you cannot switch projector inputs
by pressing this button, you need to manually program the RS232
code into the visualiser. See the section “Controlling Projector with
Visualiser” for detailed instruction.
16
