RXC-3000
Hardware Installation and User Guide
9000-0000-040 Revision 10
12 of 46
Genave Electronics
Enter to adjust the unit’s
addresses for System, Group,
and Unit.
(refer to Prog. Guide Sec. 13)
Enter to adjust the Date and
Time if the clock is installed.
(refer to Prog. Guide Sec. 14)
Enter to adjust the settings
for the DTMF Decoder.
(refer to Prog. Guide Sec. 15)
Enter to adjust settings for
the Two Tone Decoder.
(refer to Prog. Guide Sec. 16)
Enter to insert, delete or
adjust the actions of the
relays when active.
(refer to Prog. Guide Sec.
17
Enter to insert, delete or
adjust what actions are to be
started with the input
switches.
(refer to Prog. Guide Sec. 18)
Enter to inhibit actions during
certain times of the day if the
clock is installed.
(refer to Prog. Guide Sec. 19)
Enter to create action
functions and scripts.
(refer to Prog. Guide Sec. 20)
Enter to select radio or ADPCM
audio sent to PA port.
(refer to Prog. Guide Sec. 21)
Enter to adjust the radio’s
frequency, Wide/Narrowband
and DCS/CTCSS code.
(refer to Prog. Guide Sec. 22)
Enter to adjust the radio’s
squelch level.
(refer to Prog. Guide Sec. 23)
Enter to view Two Tone
Sequential codes captured
over-the-air.
(refer to Prog. Guide Sec. 24)
Enter to view DTMF codes
captured over-the-air.
(refer to Prog. Guide Sec. 25)
Enter to edit the password to
access sub-menus.
(refer to Prog. Guide Sec. 26)
Enter to restore original
program.
(refer to Prog. Guide Sec. 27)
Twist to view current
Firmware version
“Adjust Settings” Screens
