Gen3 Gensonic, Инструкция по эксплуатации

Страница: 4 / 12

Page 3
3.
Main Features
The Gensonic unit can be purchased with or without Gensonic SCC. Two different
sizes of SCC are available to choose from (SCC29 = 740x740mm and SCC24 =
584x584mm).
Typical features are listed below:
A cost effective method to use
Uses minimal processing fluids
No risk of stencil damage
Typical 3 minute cleaning cycle
Suitable for both stainless steel & plastic stencils
Cleans solder paste or SMD adhesives
Accepts both foils or framed stencils
4.
Safety precaution
Any connection between power sources and transducers should be firmly fixed.
Ensure the unit is connected to the correct supply voltage and is earthed.
The unit should be ground to prevent electrical shock.