Page
5
of
42
This guarantee is limited to the performance of the system only, Gen3 accepts no responsibility for any
consequential loss or damage, nor claimed or implied performance, when the system is used with any other
equipment or software.
This guarantee may be invalidated if the system is subject to inappropriate use, used in adverse
environments or conditions outside the specification or the system has been subjected to unauthorised
modifications.
This guarantee does not cover the expense of service engineers’ visits to the site to repair or commission the
system.
3
UNPACKING THE SYSTEM
This section details the unpacking and installation procedures required for the correct operation of the
A. It also includes the hardware and software installation instructions. Failure to follow these
instructions may result in inaccurate results and operational difficulties.
3.1
Introduction
Your unit should be received in a sealed wooden crate (64 x 54 x 39cm in size). Before opening, check the
crate for any external damage that may have occurred during delivery. If the crate has sustained any serious
damage, the carrier should be contacted immediately.
Gen3 employ “Tip n’Tell” and other similar devices that are intended to show if the package has not been
transported correctly. If there is any evidence of mishandling and/or as shown by these devices, you must
notify Gen3 immediately. DO NOT open the package any further until you receive instructions to do so.
Such instructions will be given by Gen3 or its officially appointed agent.
Ensure that the crate is the right way up then, taking a screwdriver with a number 2 pozi-drive head, undo
the screws that retain the lid of the crate.
Remove the "Packing list" from the crate and read through, checking that all of the items on the list have
been included.
Remove the USB flash drive, measurement cables and bias plug. Carefully lift the A unit along with
its foam chassis from the packing crate. Remove the foam chassis from each end of the A.
Put the A unit down on a stable bench, close to a power socket. Retain the crate for future use.