WX-5520A Dual Band Access Point
Wireless Broadband Anywhere
15
Troubleshooting
Basic Functions
My Wireless AP will not turn on. No LED’s light up.
Cause:
§
The power is not connected.
Resolution:
§
Connect the power adapter to your AP and plug it into the power outlet.
Note: Only use the power adapter provided with your AP. Using any other adapter may
damage your SOHO AP Router.
LAN Connection Problems
I can’t access my SOHO AP Router.
Cause:
§
The unit is not powered on.
§
There is not a network connection.
§
The computer you are using does not have a compatible IP Address.
Resolution:
§
Make sure your AP is powered on.
§
Make sure that your computer has a compatible IP Address. Be sure that the IP Address
used on your computer is set to the same subnet as the AP. For example, if the AP is
set to 192.168.5.250, change the IP address of your computer to 192.168.5.15 or
another unique IP Address that corresponds to the 192.168.5.X subnet.
Use the Reset button located on the rear of the AP to revert to the default settings.
I can’t connect to other computers on my LAN.
Cause:
§
The IP Addresses of the computers are not set correctly.
§
Network cables are not connected properly.
§
Windows network settings are not set correctly.
