background image

 

Gemtek Power Line 802.11g Wireless Router User Guide 

 

 

 

Introduction 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

GT Powerline Router is a multi-function device which connects to

a cable or DSL modem providing Internet connectivity to both

wired and wireless computers. The Powerline Wireless Router

function lets you to securely expand the range of your local area

network, while Power utilizes the electric cord as the transfer

media, the 11g utilizes the electric wave. 

The GT Powerline Router offers a convenient way to create a 

simple network through the existing power line of a home or 

office with the additional ability to provide you with access to your

network without wires. Offering several levels of security, the GT 

Powerline Router is built with 64/128-bit WEP encryption and 

802.11i (WPA /WPA-PSK, ) for the wireless pass-through and 

56-bit DES encryption for the Power line pass-through There are 

also some Enhanced Security Management Functions: 

Wireless/Wired 802.1x, and Embedded RADIUS Server so your 

data will always be secured—guaranteed.   

With high data rate and power line around everywhere, you can

enjoy the high quality video or any service in any place. With a

web-based UI ( User Interface ), the GT Powerline Router  is

easy to setup and maintain. All functions can be configured with

the UI via web browsers.   

 

Содержание Power Line





















Отзывы: