8
3. WORKING WITH THE MACHINE
3.1 Switch on the machine
Turn the main switch to the position „
Ready
“ (see ill. 06)
3.2 Select the operating mode
You can choose from two operating modes:
3.2.1.
Test fold
a. Insert the document to be folded (see 2.4)
b. Check the fold type (see fold type set-up under 3.3 and 4)
c. Start the folding process by moving the start lever once to the position
„
Test“
(see ill. 07 and under 2.1)
d. The machine folds one document (test fold)
e. Check the result of the folding
3.2.2.
Continuous fold
a. Insert the documents to be folded (see under 2.4)
b. Check the fold type (see fold type set-up under 3.3 u. 3.4)
c. Start the folding process by moving the start lever to the position „
Start“
(see ill. 08 and under 2.1)
d. The folder stops if
i. There is no paper; in this case refill the paper tray
or
ii. You stop it by moving the start lever to the position „Ready“
Stop
Ready
Test
Start
Ready Test Start
Ill. 06 ill. 07 ill. 08