manualshive.com logo in svg
background image

Introduction

Your Gems DM21 Rate Meter with Total is one model in a family of 1/8 DIN units
which offers breakthrough display technology as well as easy-to-program single-line
parameters.  Designed to provide instant visual feedback regarding an application’s
key input value, the DM21 not only has a 0.71” high LED display (27% larger than
other 1/8 DIN units), but also the ability to change display color based on process
status (programmable parameter in Operation Mode).  Easy programming is made
possible via a help function and a secondary legend display.

This manual will guide you through the installation and wiring of your DM21 unit
with information on proper panel mounting and rear terminal layout and wiring
instructions.  In addition, the instrument’s operation and programming modes are
thoroughly explained.  The Operation Mode provides day to day operation and
allows editing of preset values.  The Program Mode enables the configuration of
various parameters prior to initial operation.  These parameters include those for
basic configuration as well as other settable features which will enhance the
functionality and usability of
the device.

This manual also provides
information on the DM21
Rate Meter with Total’s
alarms; transistor, relay and
linear outputs; product
specifications; and ordering
and warranty procedures.

Index

Installation

Panel Mounting

page 2

Wiring

page 3

Operation

Front Panel

page 4

Operation Mode

page 5

Programming

Program Mode

page 6-10

Appendix A

Specifications

page 11

General

Ordering Information

page 12

Warranty

page 12

Features

• AWESOME 0.71” high digit LED display

• Programmable color change display based on

an event

• Programmable help function and secondary

legend display

• Display configurable for update time, min.

number of pulses, and forced zero time

• Optional linear output relative to rate

• Choice of NPN, PNP, or magnetic primary

input

• Filter speed settable for 20, 200, or 10,000 Hz

• Standard outputs:  two NPN transistors & one

relay (optional 2nd relay)

• Front panel reset enable and alarm lockout

• Optional RS-485 plug in card

• CE approved

Technical Manual
182022

DM21-5XXXX
Rate Meter
with Total

Содержание DM21 Series













Отзывы: