9
6.5
Network
In Network you can check the Network status, configure the Network Settings and DDNS settings.
Network Status
：
You can check the current Network setting in this page.
WAN Settings
：
You can configure the WAN setting in this page.
The TCP/IP Configuration item is to setup the LAN port’s network environment. You may refer to
your current network environment to configure properly.
The PPPoE Configuration item is to setup the PPPoE Username and Password. If you have the
PPPoE account from your Service Provider, please input the Username and the Password
correctly.
The Bridge Item is to setup the Bridge/NAT mode . If you set the Bridge On, then the two Fast
Ethernet ports will be transparent.
When you finish the setting, please click the Submit button.
