Gemmy PLC-012, Руководство пользователя

Страница: 11 / 20

DISASSEMBLY
： ： ： ：
WARNING
：
： ：
：
For sake of safety, the disassembly to this equipment is strictly limited
to the qualified personnel or licensed engineers only.
GEMMY will not ensure the responsibility if user violates this
regulation.
Remove screws from the sides of steel case to release the upper
and down case set.
Loosen the 3 nuts from rubber supports attached to the bottom
mount to remove the rack of motor.
Unscrew the motor from the rack;
Disconnect wires from assembly prior to disassemble the
electronic parts;
Loosen the screw to remove the Connector from motor;
Loosen the bolt to remove the rotor.
Use the hexagon wrench to remove the bolt and rotor from
connector fro the replacement of rotor.
The power switch power cord outlet should be compressed on the
sides from removal.
Loosen set screw and remove control knob of timers and speed
regulator;
Use wrench or pliers to remove the nuts fro the removal of Brake
switch and speed regulator;
Remove from control panel and loosen 2 screws from timer
removal (PLC-012, PLC-012BP);
Rotor chamber is detachable;
Loosen 2 plastic screws attached to the lower part of motor to
replace the carbon brushes.
WARNING
： ： ： ：
-
Disconnect from power supply prior to disassembly of this
equipment.
-
People other than the qualified personnel or licensed engineers
are strictly prohibited for disassembly.
9