BCB US Rev.00 01-2019
pag. 31
8
– MAINTENANCE
8.1
– SPECIAL PRECAUTIONS
Contact the manufacturer for any anomalies not described in this manual; contact the manufacturer
also for any doubts during the maintenance operations described herein. Maintenance carried out
by unauthorized personnel may damage the appliance and expose the operator to serious hazards.
Maintenance carried out by unauthorized personnel is considered tampering with the appliance and
therefore nulls the warranty and relieves the manufacturer of any responsibility.
Any routine or extraordinary maintenance operation that requires the electric box to be
opened or the machine to be dismantled, even partially, must be carried out only after the
appliance has been switched off the main switch, and unplugged.
Any maintenance operations carried out on a live machine may cause people serious
accidents which may also be fatal.
The safety devices must be deactivated only by authorized personnel, who will guarantee safety for
people and avoid damage to the machine. The safety devices must be carefully activated again after
carrying out maintenance.
During maintenance or repairs unauthorized persons must keep a safe distance from the appliance.
Observe the intervals prescribed or indicated in this manual for making inspections.
At the end of maintenance or repairs the appliance can be started only after the specialist engineer
has made sure that:
-
all the work has been fully carried out;
-
the safety systems are active;
-
the appliance is working perfectly;
-
no-one is working on the appliance.
8.2
– ROUTINE MAINTENANCE
8.2.1
– ROUTINE MAINTENANCE TABLE (TAB. 5)
Component
Type of operation
Timing
Responsibility
Method
Chamber
Cleaning
When needed
Appliance operator
See para. 8.2.2
External part
Cleaning
When needed
Appliance operator
See para. 8.2.3
Condenser
Cleaning
Every 30 days
Appliance operator
See para. 8.2.4
Core probe
Cleaning
Every cycle
Appliance operator
See para. 8.2.5
Tab. 5
8.2.2
–CLEANING THE CHAMBER
Carry out this operation whenever necessary.
APPLIANCE STATUS:
-
I/O main switch
in position “O” (OFF);
-
power supply plug disconnected from the mains.
AUTHORIZED PERSONNEL
Appliance operator.
Содержание New Runner BCB/05US
