geminox EBS-1 100, Технические инструкции, Страница: 15 / 32

- 15 -
INSTALLATION
When the system installed is "Unvented" it is
necessary to fit the "unvented kit" on the cold
water supply. The "Unvented kit" contains
pressure reducing valve, non-return valve,
pressure relief valve and optional use balanced
cold water connector. It is good practice to fit
the "unvented kit" above the top level of the
EBS-1 tank. In this way if it is required to replace
the "unvented kit" it is not necessary to drain all
tank. Please find below how to install the
"unvented kit"
6.3.1 - ¾" Unvented kit for EBS-1 cylinders
6.3.2 - ¾" Unvented kit for EBS-1 cylinders
6.3 - Hydraulic connections for cylinders
1) Unvented kit
2) Safety zone valve
3) Expansion vessel
4) Expansion vessel connection
5) Tundish
1
2
3
4
5
4
7
6
8
9
12
11
10
4) Expansion vessel connection
6) Cold water
7) Cold water to EBS-1 tank
8) To drain valve
9) Balanced cold water
10) Discharge
11) Pressure relief valve
12) Pressure reducing valve