(4
4)
Congratulations on your purchase of a
Gemini PS-04 10" 3 channel
stereo mixer. This state-of-the-art mixer features the latest technological
advances and is backed by a
3
year warranty, excluding the cross fader.
The cross fader is backed by a separate
90
day warranty. Prior to use
we suggest that you carefully read all the instructions.
- Professional 3 Channel Stereo FX Mixer
- 10" 3 stereo channel mixer
- 6 line, 3 convertible phono/line, RCA inputs
- Master, record, & zone RCA outputs
- ¼" balanced outputs
- Triple ground screw for easy connectivity
FACE:
- Easy removable face plate for user replaceable Rail Glide cross fader
- Bright blue LCD display for FX names & FX parameters
- FX assign switch
- Dry/Wet fader control
- Rotary FX selector & parameter controls
- Dual mode backlit FX on/off & cue effect button
- 3 band rotary line EQ with cut feature & rotary gain channel control
- Lighted push button cue section
- Rotary zone & balance controls
- Dual VU display with bright LED & mode switch
- Master volume fader control
FRONT:
- ¼" headphone output & Mic input
- Cue section with rotary cue volume & CUE/PGM controls with cue split
/mix switch
- Mic section with rotary Mic volume, high & low EQ controls
- Fader section with hamster/reverse, slope, & assign switches
1. All instructions should be read before using this equipment.
2. To reduce the risk of electrical shock, do not open the unit. Please
refer all servicing needs to a Gemini-qualified service technician.
3. Do not expose this unit to direct sunlight or a heat source such as a
radiator or stove.
4. This unit should be cleaned only with a damp cloth. Avoid solvents or
other cleaning detergents.
5. When moving this equipment it should be placed in its original carton
and packaging. This will reduce the risk of damage during transit.
6.
DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.
7.
DO NOT USE SPRAY CLEANERS OR LUBRICANTS ON CON-
TROLS, SURFACES OR SWITCHES.
1. Before plugging this unit into any outlet, make sure that the
VOLTAGE
SELECTION SWITCH
(1) is set to the proper voltage. To change the
selection, unscrew the hard plastic protective top with a Phillips head
screw driver. Then use a flat head screw driver to move the switch to the
proper selection (
115V/230V
). Replace the hard plastic protective top,
and screw into the unit.
2. Ensure that the
POWER
(4) switch is in the
OFF
position prior to mak-
ing any connections. This unit comes with a power cord. Plug into the
rear panel
POWER CORD
(2) jack before plugging it into a proper power
source.
NOTE: LOCATED BY THE POWER CORD (2) JACK IS A 250V FUSE (3) TO PROTECT
AGAINST ELECTRICAL SURGES. TO REPLACE THE FUSE, PLACE A FLAT HEAD
SCREWDRIVER INTO THE GROOVE LOCATED INSIDE THE POWER CORD JACK (2) AND
POP THE FUSE OUT. REPLACE THE FUSE WITH ONLY A 250V FUSE.
3. The
PS-04
has four outputs located on the rear panel:
- The
MASTER RCA OUTPUT
(5) connects the mixer to your main
amplifier using standard audio cables with
RCA
-type conectors.
- The
BALANCED MASTER OUTPUT
(8) connects the mixer to your
main amplifier using standard cables with
1/4"
connectors. We recom-
mend using balanced cables if the distance to your amp is
10
feet or
more.
- The
ZONE
(7) output jacks allow the connection of an additional
amplifier with
RCA
cables.
- The
REC
(6) output jacks can be used to connect the mixer to the
record input of your recording unit, thus enabling you to record your mix
with
RCA
cables.
4. Headphones may be plugged into the front panel-mounted
HEAD-
PHONES
(22)
¼"
jack.
5. Microphones may be plugged into the front panel-mounted
MICRO-
PHONE
(21)
¼"
jack.
6. The
PS-04
has
3 CONVERTIBLE PHONO/LINE
(
PH/LN
)
RCA
INPUTS
(10, 14, 18) located on the rear panel on either side of the
RCA
INPUTS
. Facing the rear panel, the convertible
RCA
input on your right
is for
PH1/LN1
(18). The convertible
RCA
input in the middle is for
PH2/LN3
(14). The convertible
RCA
input on your left is for
PH3/LN5
(10). Using the
PH/LN CONVERTERS
(11, 15, 19), located just below
each input, you may convert the
PH
to
LN
and vice versa. Plug the
RCA
's from your playable medium into each input to be connected to
their respective
CHANNELS
(
CH
). The
PH INPUTS
(10, 14, 18) only
accept turntables with a magnetic cartridge. The
STEREO LN INPUTS
(9, 10, 13, 14, 17, 18) only accept line level inputs such as a
CD
,
DAT
,
Mini Disc
,
etc
and require the proper switch settingand require the
LN
switch setting as indicated in the
PH/LN CONVERTER SWITCHES
(11,
15, 19).
7. When using (a) turntable(s), you will need to ground the
RCA
cable(s)
by screwing in the grounding fork(s) to the
TRIPLE GROUNDING
SCREWS
(12 ,16, 20) located in the rear panel of the
PS-04
mixer.
Attach each
PH
ground lines to one of the
TRIPLE GROUND THUMB
SCREWS
(12, 16, 20). These are to the right of each
PH/LN CONVERT-
ER
(11, 15, 19).
NOTE: WHEN USING TURNTABLES, NOT ATTACHING A GROUND MAY CAUSE A SYSTEM
"HUM."
1. Once all of your connections have been made in the rear panel, turn
on the mixer by pressing the
POWER SWITCH
(4).
2.
CH1:
To bring this channel into program output (
PGM
), you must first
decide which line will be in use. Use the
LN SWITCH
(23) to toggle from
PH1/LN1
(18) to
LN2
(17) on this channel. Once you've selected the
proper line, slowly raise the
CH1 FADER CONTROL
(29) to a comfort-
able level. You can further modify the sound output of this channel by
adjusting the rotary
GAIN
(24),
HIGH
(25),
MID
(27),
LOW
(26) controls
located to the left of the
CH1 FADER CONTROL
(29).
3.
CH2:
To bring this channel into
PGM
, you must first decide which line
will be in use. Use the
LN SWITCH
(30) to toggle from
PH2/LN3
(14) to
LN4
(13) on this channel. Once you've selected the proper line, slowly
raise the
CH2 FADER CONTROL
(36) to a comfortable level. You can
further modify the sound output of this channel by adjusting the rotary
GAIN
(31),
HIGH
(32),
MID
(34),
LOW
(33) controls located to the left of
the
CH2 FADER CONTROL
(36).
4.
CH3:
To bring this channel in to
PGM
, you must first decide which line
will be in use. Use the
LN SWITCH
(37) to toggle from
PH3/LN5
(10) to
LN6
(9) on this channel. Slowly raise the
CH3 FADER CONTROL
(43)
to a comfortable level, once you've selected the proper line. You can fur-
ther modify the sound output of this channel by adjusting the rotary
GAIN
(38),
HIGH
(39),
MID
(41),
LOW
(40) controls located to the left of
the
CH3 FADER CONTROL
(43).
NOTE: FOR OPTIMAL PERFORMANCE, BEGIN PROGRAM MIX WITH ROTARY GAIN (24,
31, 38) CONTROLS SET TO MINIMUM (ROTATE IT TO THE COUNTER CLOCKWISE POSI-
TION). MAKE ALL ADJUSTMENTS IN SOUND OUTPUT WITH THE USE OF YOUR
CHANNEL FADER CONTROLS (29, 36, 43), ZONE (51), BALANCE (52), AND MASTER VOL-
UME (47) CONTROLS. THIS WILL PREVENT SIGNAL OVERLOAD AND DECREASE DIS-
TORTION. ONCE YOU HAVE MODIFIED YOUR SOUND AND WOULD LIKE TO INCREASE
THE OUTPUT OF YOUR SOUND, THEN YOU MAY ADJUST THE ROTARY GAIN CONTROL
IF NEEDED.
5.
CUE:
By connecting a set of headphones to the
HEADPHONE
(22)
jack, you can monitor any or all channels. Press the
CUE BUTTONS
(28, 35, 42) for
CH1
through
CH3
to assign the
CH
(s) to be monitored in
your headphones. The respective
CUE LED
indicators will glow when in
use. Use the front panel located rotary
CUE VOLUME CONTROL
(44)
to adjust the
CUE
volume without changing the overall mix. By turning
the front panel located
CUE/MIX/PGM
(45) rotary control counter clock-
wise you will be able to monitor the assigned
CUE
signal. Slowly turning
the control clockwise to middle position (
MIX
) allows you to monitor
CUE
mix with
PGM
. Moving the control clockwise to the right allows you to
monitor
PGM
output.
Use the
CUE SPLIT/MIX SWITCH
(48) to split the audio input playing
INTRODUCTION:
FEATURES:
PRECAUTIONS:
I
N THE
USA ~
IF YOU EXPERIENCE PROBLEMS WITH THIS UNIT CALL
G
EMINI
C
USTOMER
S
ERVICE AT
: 1 (732) 738-9003. D
O NOT ATTEMPT TO RETURN THIS EQUIPMENT TO YOUR
DEALER
.
CONNECTIONS:
OPERATING INSTRUCTIONS:
Содержание PS-04
Страница 3: ... 3 PS 0 04 REAR FRONT FACE REAR FRONT FACE ...
Страница 15: ...P PS S 0 04 4 P PS S 0 04 4 NOTES ...