Gemini PS-01 Скачать руководство пользователя страница 4

Страница: 4 / 12

Congratulations on your purchase of a

Gemini PS-01 10" 3

channel stereo mixer

. This state-of-the-art mixer features the

latest technological advances and is backed by a

year warran-

ty, excluding the

cross fader

. The

cross fader

is backed by a

separate

day warranty. Prior to use we suggest that you

carefully read all the instructions.

- 10" 3 stereo channel mixer

- 6 line, 3 convertible phono/line, RCA inputs

- Master, record, & zone RCA outputs

- ¼" balanced outputs

- Triple ground screw for easy connectivity

FACE:

- Removable face plate for user replaceable Rail Glide cross fader

- 3 band rotary line EQ with cut feature & rotary gain channel control

- Lighted push button cue section with split cue switch

- Rotary cue volume, CUE/PGM, zone, & balance control

- Dual VU display with bright LED & mode switch

- Master volume fader control

FRONT:

- ¼" headphone output & Mic input

1. All instructions should be read before using this equipment.

2. To reduce the risk of electrical shock, do not open the unit.

Please refer all servicing needs to a

Gemini

-qualified service

technician.

3. Do not expose this unit to direct sunlight or a heat source

such as a radiator or stove.

4. This unit should be cleaned only with a damp cloth. Avoid sol-

vents or other cleaning detergents.

5. When moving this equipment it should be placed in its origi-

nal carton and packaging. This will reduce the risk of damage

during transit.

DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE

DO NOT USE SPRAY CLEANERS OR LUBRICANTS ON

CONTROLS, SURFACES OR SWITCHES

1. Before plugging this unit into any outlet, make sure that the

VOLTAGE SELECTION SWITCH

(1) is set to the proper volt-

age. To change the selection, unscrew the hard plastic, protec-

tive top with a Phillips head screw driver. Then use a flat head

screw driver to move the switch to the proper selection (

115

V/230 V

2. Ensure that the

POWER SWITCH

(4) is in the

OFF

position

prior to making any connections. This unit comes with a power

cord. Plug into the rear panel

POWER CORD

(2) jack before

plugging it into a proper power source.

NOTE: LOCATED BY THE POWER CORD (2) JACK IS A 250V FUSE (3) TO
PROTECT AGAINST ELECTRICAL SURGES. TO REPLACE THE FUSE,
PLACE A FLAT HEAD SCREWDRIVER INTO THE GROOVE LOCATED INSIDE
THE POWER CORD (2) JACK AND POP THE FUSE OUT. REPLACE THE FUSE
WITH ONLY A 250V FUSE.

3. The

PS-01

has

outputs located on the rear panel:

- The

MASTER RCA OUTPUT

(5) connects the mixer to your

main amplifier using standard audio cables with

RCA-

type con-

nectors.

- The

BALANCED MASTER OUTPUT

(8) connects the mixer

to your main amplifier using standard cables with

1/4"

connec-

tors. We recommend using balanced cables if the distance to

your amp is

feet or more.

- The

ZONE

(7) output jacks allow the connection of an addi-

tional amplifier with

RCA

cables.

- The

REC

(6) output jacks can be used to connect the mixer

to the record input of your recording unit, thus enabling you to

record your mix with

RCA

cables.

4. Headphones may be plugged into the front panel-mounted

HEADPHONE

(22)

¼"

jack.

5. Microphones may be plugged into the front panel-mounted

MICROPHONE

(21)

¼"

jack.

6. The

PS-01

has

3 CONVERTIBLE PHONO/LINE

(

PH/LN

)

RCA INPUTS

(10, 14, 18) located on the rear panel on either

side of the

RCA INPUTS

. Facing the rear panel, the convertible

RCA

input on your right is for

PH 1/LN 1

(18). The convertible

RCA

input in the middle is for

PH 2/LN 3

(14). The convertible

RCA

input on your left is for

PH 3/ LN 5

(10). Using the

PH/LN

CONVERTERS

(11, 15, 19), located just below each input, you

may convert the

and vice versa. Plug the

RCA

's from

your playable medium into each input to be connected to their

respective

CHANNELS

(

). The

PH INPUTS

(10, 14, 18) only

accept turntables with a magnetic cartridge. The

STEREO LN

INPUTS

(9, 10, 13, 14, 17, 18) only accept line level inputs such

as a

DAT

Mini Disc

, etc and require the proper switch set-

ting.

7. When using (a) turntable(s), you will need to ground the

RCA

cable(s) by screwing in the grounding fork(s) to the

TRIPLE

GROUNDING SCREWS

(12, 16, 20) located in the rear panel of

the

PS-01

mixer. Attach each

ground line to one of the

TRIPLE GROUND THUMB SCREWS

(12, 16, 20). These are to

the right of each

PH/LN CONVERTERS

(11, 15, 19).

NOTE: WHEN USING TURNTABLES, NOT ATTACHING A GROUND MAY
CAUSE A SYSTEM "HUM."

1. Once all of your connections have been made in the rear

panel, turn on the mixer by pressing the

POWER SWITCH

(4).

CH 1:

To bring this channel into program output (

PGM

), you

must first decide which line will be in use. Use the

LN SWITCH

(23) to toggle from

PH 1/LN 1

(18) to

MIC 1

(21) to

LN 2

(17) on

this channel. Once you've selected the proper line, slowly raise

the

CH 1 SLIDE CONTROL

(29) to a comfortable level. You can

further modify the sound output of this channel by adjusting the

rotary

GAIN

(24),

HIGH

(25),

MID

(27),

LOW

(26) controls locat-

ed above the

CH 1 SLIDE CONTROL

(29).

CH 2:

To bring this channel into

PGM

, you must first decide

which line will be in use. Use the

LN SWITCH

(30) to toggle from

PH 2/LN 3

(14) to

LN 4

(13) on this channel. Once you've select-

ed the proper line, slowly raise the

CH 2 SLIDE CONTROL

(36)

to a comfortable level. You can further modify the sound output

of this channel by adjusting the rotary

GAIN

(31),

HIGH

(32),

MID

(34),

LOW

(33) controls located above the

CH 2 SLIDE

CONTROL

(36).

CH 3:

To bring this channel in to

PGM

, you must first decide

which line will be in use. Use the

LN SWITCH

(37) to toggle from

PH 3/LN 5

(10) to

LN 6

(9) on this channel. Slowly raise the

3 SLIDE CONTROL

(43) to a comfortable level, once you've

selected the proper line. You can further modify the sound out-

put of this channel by adjusting the rotary

GAIN

(38),

HIGH

(39),

MID

(41),

LOW

(40) controls located above the

CH 3 SLIDE

CONTROL

(43).

NOTE: FOR OPTIMAL PERFORMANCE, BEGIN PROGRAM MIX WITH
ROTARY GAIN (24, 31, 38) CONTROLS SET TO MINIMUM (ROTATE IT COUN-
TERCLOCKWISE TO THE COUNTER CLOCKWISE POSITION). MAKE ALL
ADJUSTMENTS IN SOUND OUTPUT WITH THE USE OF YOUR CHANNEL
SLIDE CONTROLS (29, 36, 43), ZONE (51), BALANCE (52), AND MASTER (47)
VOLUME SLIDE CONTROLS. THIS WILL PREVENT SIGNAL OVERLOAD AND
DECREASE DISTORTION. ONCE YOU HAVE MODIFIED YOUR SOUND AND WOULD
LIKE TO INCREASE THE OUTPUT OF YOUR SOUND, THEN YOU MAY ADJUST
THE ROTARY GAIN CONTROL IF NEEDED.

CUE:

By connecting a set of headphones to the

HEAD-

PHONE

(22) jack, you can monitor any or all channels. Press

INTRODUCTION:

FEATURES:

PRECAUTIONS:

N THE

USA ~

IF YOU EXPERIENCE PROBLEMS WITH THIS UNIT

CALL