page 2
800.545.6566
www.riogrande.com
Sharing your passion for making jewelry.
Products. Service. Know-how.
Apollo Ring saw Instruction Manual
The Apollo Ring saw is shipped in two
(2) boxes. One box contains the saw
plus one or more blade cartridges.
The other box contains the slide
tray, magnetic angles, and mounting
hardware.
Depending on configuration, the saw
may include a sintered blade ring
cartridge for precision slicing and
gentle curve cutting (backward and
forward) in glass and stone; a wire
blade ring cartridge for extreme cutting
detail and omni-directional cutting;
a solid sintered blade cartridge
for standard straight cuts in all
materials and available in standard grit
(4" or 6" dia.) or in fine grit (6" dia.).
Six-inch versions will cut materials up
to 3" thick; four-inch versions will cut
up to ¾ " thick.
saw Setup
1. Remove and set aside magnetic filter
plate (fig. A).
2. Loosen the four (4) thumb nuts. (Fig. B).
3. Tilt saw and remove the clear plastic
cover (fig. C).
4. Remove the 8-32 hex nut and star lock
washer. Leave spacer and washer in
place (fig. D).
5. Insert keel from the top slot; secure with
star lock washer and 8-32 hex nut (figs.
E, F & G).
Assembly/Contents
Sintered Ring
Blade Cartridge
Wire Blade Ring
Cartridge (Electroplated)
Solid Sintered
Blade Cartridge, 4"
Solid Sintered
Blade Cartridge, 6"
A
C
F
B
D
G
Keel
E
E
