USB2.0 to IDE100 cable with external adapter
Introduction
Thank you for buying our USB2.0 to IDE100 cable with external
adapter! This manual will help you install it properly.
Features
•
Fully compatible with USB 2.0 and USB 1.1 interfaces
•
Suitable to all IDE 3,5" hard disk drives
•
Hot-swap, Plug-and-Play
•
Length: 65cm
•
15-20Mbyte per second transfer rate depending on the
hard disk drive used
•
Capacity is determined by the capacity of the hard dis k
drive inserted in the enclosure
•
Includes CE-approved 1.5A power adaptor
UAI001 User Manual
