10
GEMBIRD EUROPE B.V. http://www.gembird.eu
SIS-PMS
PROGRAMMABLE SURGE PROTECTOR
•
The manageable sockets of SIS-PMS can be programmed to be on
or off. The current status of each manageable socket is represented
by the corresponding indicator which will be lit if socket has power to
it.
•
If the
Main rocker switch (Z)
(see figure #1 above) is turned off then
the manageable sockets cannot be switched on by either
Power
manager
software or the hardware schedule.
•
As soon as you turn the
Main rocker switch (Z)
on then the
Power
manager
software or the hardware schedule will be able to turn the
manageable sockets on and off.
•
To protect the connected devices from possible high current and
short circuit SIS-PMS is equipped with the automatic circuit breaker.
NOTE:
If the total power consumption (or peak power) of the devices,
connected to SIS-PMS exceeds 2200 Watts, the circuit breaker may
power SIS-PMS off. In this case, please, remove the excessive load first
and then press the
Circuit breaker
button to restore the power supply
(see figure #2 above).
3.2.
Power Manager
installation
•
Insert the
Power Manager
CD into a PC CD-ROM drive.
If for any reason the automatic setup does not work, then open CD-ROM
drive in the
My Computer
window and launch SETUP.EXE from the CD
•
Follow instructions of the installation software
