51
You can now configure other advance sections or start using the router (with the advance settings
in place)
2.5.2 IP Filtering
If you want to restrict users from accessing certain Internet applications/services (e.g. Internet
websites, email, FTP etc.), then this is the place to set that configuration. Entries in this table are
used to restrict certain types of data packets from your local network to Internet through the
Gateway. Use of such filters can be helpful in securing or restricting your local network.
Parameters
Description
Enable IP Filtering
Check this box to enable the IP filtering function.
Add a new entry into the list
Fill in the "Local IP Address", "Protocol" and "Comment"
of the filtering rule to be added and then click "Apply ".
Then specified IP will be added into the "Current Filter
Table" below. If you find any issues before adding it and
want to retype again. Just click "Cancel" and all inputed
fields will be cleared.
Remove an entry from the list
If you want to remove some filter rule from the "Current
Filter Table", select the Local IP Address you want to
remove in the table and then click "Delete Selected". If
you want remove all Local IP Address from the table,
