42
Associated Clients
Click “Show Active Clients” button, then an
“Active Wireless Client Table” will pop up. You
can see the status of all active wireless stations
that are connecting to the access point.
Enable MAC Clone
Check the check box will copy the MAC address
of your PC to wireless Interface when the first
packet was received.
Enable Universal
By enable the universal repeater mode, the.
Repeater Mode
router will act as AP and client simultaneously.
SSID of Extended
Set the SSID for the extended wireless interface.
Interface
Click <
Apply>
at the bottom of the screen to save the above configurations. You can now
configure other advance sections or start using the router (with the advance settings in place)
2.4.2 Advanced Settings
You can set advanced wireless LAN parameters of this router. The parameters include
Authentication Type, Fragment Threshold, RTS Threshold, Beacon Interval, Preamble
Type …… You should not change these parameters unless you know what effect the
changes will have on this router.
