Ethernet network attached storage enclosure
Please ensure that you install the device driver before
connecting the USB port. When you complete the driver
installation, reboot your computer, connect the NAS to your
computer and access the data via "My Computer".
You can also access data in the NAS connecting it directly
using the Ethernet cable with your computer. The NAS will have a
default IP of 169.254.0.1 when connected directly.
Connecting to your Network
Connect the power adapter to the back panel of the NAS and
plug the other end to a wall outlet or power strip. Connect the
network cable to the LAN port on the back of the NAS and the
other end of the network cable to a port on your hub, switch or
router.
The Ethernet port on the NAS is Auto-MDI/MDIX, which
means you can connect it using either a crossover or a direct
network cable.
