4
DAC-WPC-01 DIGITAL ALARM CLOCK
WITH WIRELESS CHARGING FUNCTION
GEMBIRD EUROPE B.V.
http://www.gembird.eu
All brands and logos are registered trademarks of their respective owners
OPERATING
1. Power on, LED display on with Time and Temperature.
2. In various modes (except temperature), press and hold [
Menu
] to enter the setting state, and adjust the
setting digit by press and hold [
Down
] and [
Up
] to up or down the digit rapidly.
3. Press [
Menu
] to switch modes (Time / Date / A1 / A2 / A3) below, to set the modes you need by long press
[
Menu
] when what’s show up on screen
Time
A. Setting range: Hour: 1-12 hour or 0-23 hour; Minute: 00-59.
B. when the dot light up on the upper left corner of the display panel to indicate it’s time for afternoon.
Date
A. Setting range: Month: 1-12; Day: 1-31; Year: 2000-2099.
B. Setting detail: Left idle for 15 seconds it will exit setting status. Dp-1 return directly to Time mode. Dp-2
displays the Date have been set. Dp-3 return to the Date mode, and return to the Time mode after 15
seconds.
Alarm
A. There will be a dot light up at the right upper of Minute once the Alarm set.
B. While It’s time for Alarm, it will automatically return to the Alarm mode with buzzer ringing and Alarm dot
keep blinking. Press any button to stop the sound. If no operation on the button, the sound will stop after 60
seconds, the dot will not disappear.
Temperature
A. Power on, automatically detect the current temperature, Normal measurement range is from 0 to 50 (32-
122).
B. Detect temperature every 60 seconds, press [
Down
] button for 2 seconds to switch between
Fahrenheit/Celsius.
C. Temperature display light up all the time (except Power-saving ON).
Power-saving
Turn on/off the power-saving function by pressing the [
Down
] button. (ON with display oNSd and OFF shows
--Sd). Press twice to switch Standby or Power saving status.
