Gemas SLIM LED, Инструкция по эксплуатации

Страница: 3 / 5

3
3. INSTALLATION:
To correctly light a swimming pool we recommend you:
In order to prevent glare, the LED lights should be installed so that they face away from the residence or usual view of
the swimming pool.
In the event that lighting is used in training or competition pools, the LED lights should be installed on the sides to
prevent glare on the swimmers.
In installations where you want to replace a conventional spotlight by a LED Light, using the existing wiring, it is
strongly recommended to use underwater resin splicing. It is not recommended to use silicone to try to seal the
connection point of the wires. The spotlight should not be handled internally under any circumstances as this would
lead to losing the guarantee.
The Led Lights should be placed on the wall of the pool at approximately 400-700 mm from the water surface. The
method of fastening the crosshead mount to the pool wall varies depending on whether it is a LED light for concrete pools
or prefabricated pools.
The LED light should be only operated underwater while secured to the vertical walls of the pool. Never switch on
the LED light if it is not under water.
• Specify a proper cable according to distance from water line and wind the cable to
marked place on the back of light.
To Direct Pool Wall :
• LED Light can be fixed directly to pool wall with only two pieces screws marked on photo, if cross
piece can not be used
• Cross piece (1) is fixed with six pieces screw to the pool as seen on the photo. Cable output on
the wall shoulde be on center of cross piece.
• Fix LED light (2) with two pieces screws
Installation with wall conduit Installation to liner pool
• Around cable should be sealed with nut as shown on photo left.
1 2