1 SafeNet Luna Network HSM Hardware Installation
port (on the rear panel's left side), using the included USB-to-MiniUSB PED cable. See also
Remote PED Installation and Configuration" on page 26
. If you have a password-authenticated HSM, skip to the
next step.
Note:
The PED must be connected to a suitable power source. The USB 2.0 connection does
not provide enough power to run the PED.
3.
Press and release the Start/Stop switch on the front panel.
4.
Connect the terminal port on the HSM appliance's rear panel to a dumb terminal, PC, or laptop, using the USB-to-
RJ45 adapter cable (supplied). This terminal provides serial access to LunaSH for initial network configuration. See
for more information.
SafeNet Luna Network HSM Installation Guide
Release 7.0 007-013576-002 Rev. A June 2017 Copyright 2001-2017 Gemalto All rights reserved.
24