Gema OptiFlex Pro F, Инструкция по эксплуатации и список запасных частей

Страница: 46 / 60

Rev. 00 03/19
46

Maintenance / Repairs OptiFlex Pro F Spray
Cleaning the powder container
ATTENTION
Damage to the fluidizing plate
► Never clean the powder container with solvents or water!
1. Disconnect the fluidizing air supply
2. Remove the suction hose
3. Remove the cover, blow out with compressed air and clean with a
clean dry brush and cloth
4. Empty remaining powder into a bag
5. Vacuum up the hopper and in particular the bottom
6. Clean the hopper with a cloth
7. Reassemble the powder hopper
Do not refill the powder container until just before the next use!
Repair work
In the event of malfunctions or faults, the product must be checked and
repaired by an authorized Gema service workshop. The repairs must only
be performed by an authorized specialist.
Improper tampering can result in serious danger for user and equipment.
Periodic checks
The periodic checks include examining all connecting cables and hoses.
The corresponding parts should be replaced immediately if any damage
to cables or hoses is discovered.
All plugs must be properly tightened.