Gema OptiFlex Pro F, Инструкция по эксплуатации и список запасных частей

Страница: 29 / 60

Rev. 00 03/19
OptiFlex Pro F Spray Operation

29
Operation
WARNING
Holding the gun incorrectly
During the coating process, the gun can discharge along the body
of the coater if not held using its intended handle, which has been
grounded.
► Always hold gun only by the handle!
► Do not touch any other parts of the gun!
Bedienung
Operation
CAUTION
Large dust formation possible!
If the manual equipment is not being used for coating in
conjunction with a sufficiently powerful suction unit, then the
stirred-up dust from the coating powder can cause respiratory
issues or cause a slippage/falling hazard.
► The manual equipment may only be operated in conjunction with
a sufficiently powerful suction unit (such as Gema Classic Open
booth).
1. Place powder hopper on the mobile trolley
CAUTION
Foot injury!
When setting the powder hopper onto the mobile trolley of the
manual equipment, the hopper/trolley zone represents a threat of
crushed toes
► Wear safety shoes with steel toecaps.
2. Set the ventilation (Airmover)
– Open the ball valve completely
– Calibrate with the throttle valve
3. Fill in powder
– Open the powder hopper filling cover.
– Fill in powder: Fill with maximum 25 kg (50 l) powder or the
powder must reach to a maximum of 5-10 cm below the handles