Gema OptiCenter OC09, Инструкция по эксплуатации и список запасных частей

Страница: 25 / 112

Rev. 00 02/21
OptiCenter OC09 Product description

25
Displacer**
fig. 17:
–
Coating process can be started with only 6 kg of powder
–
Easy to install (small rework required in the OptiHopper)
–
Easy to clean due to no-stick materials
If there is no displacer, 11 kg of powder is required to start the
coating process.
Powder feed to guns**
–
Powder feed to guns from powder bag cone or original powder
container
–
Use up to max. 2 guns
–
Fluid/suction lance(s)
–
Not included in the cleaning procedure of the OptiCenter
–
For manual, simple coating tasks
Fig. 18
Level sensor**
–
For level detection in the powder bag cone or in the powder hopper
–
Height adjustable
–
Fluidized in the measuring range