Rev. 00 03/22
OptiFeed BigBag (FPS16)
Product description
•
21
Versions
The FPS16 Fresh powder system is available either with one (FPS16-1)
or with two powder pumps (FPS16-2). The FPS16-2 version permits a
powder transport from the large powder container to two different
destinations.
FPS16-1
FPS16-2
Fig. 4:
Support
The fresh powder system support is formed by three wall elements and
the crossbeam for the lifting devices. The wall elements must be installed
on the floor, so that the stability under load can be ensured. The
crossbeam can be installed, depending on the container, on three
different heights.
Lifting device for large containers
The lifting device for large containers consists of the hang up plate and
two pneumatic cylinders. The operation and the control take place by the
attached control cabinet.
Fluidizing/suction unit
The fluidizing/suction unit enables the loosening of the powder in the
container, and sucks the powder for the powder pump.
Lifting device for fluidizing/suction unit
The fluidizing/suction unit can be lifted manually by a cable and can be
fixed in this position by hooking-in the final loop. The fluidizing/suction unit
is lifted only during the change of the large container.
Содержание FPS16
