
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
70 Owner’s Manual
RULES FOR MIDI CONNECTION
•
In MIDI connections, the instruments that controls another is conventionally
defined as “master”, while the controlled instrument is defined “slave”.
•
The MIDI OUT of the master instrument is connected to the MIDI IN of the
slave instrument.
•
To programme Songs in an external sequencer, WK1 MIDI OUT is connected
to the MIDI IN of the sequencer; the MIDI OUT of the sequencer is connected
to the WK1 MIDI IN.
•
Do not connect the two MIDI ports of the same instrument. Do not connect
the same MIDI ports (both IN or both OUT) between two instruments.
•
In the connections with external MIDI devices, the tracks of the external
device and WK1 must be tuned to the same MIDI channels.
ASSIGNING MIDI CHANNELS
The MIDI channel setting of each Performance can be freely programmed and
can be stored with the STORE PERFORMANCE function.
The procedure to follow when assigning MIDI channels is explained in detail in
the “MIDI/GENERAL” chapter of the Owner’s Manual.
MIDI channels can be independently programmed for each track.
MIDI LOCK
If you enable the MIDI LOCK function setting it to ON (see “MIDI/GENERAL”)
the current setting of a Performance will be maintained for all other Performances.
All other settings assigned to the other Performances will be ignored.
To keep the last programmed setting stored to the instrument memory even
when WK1 is turned off, it is necessary to save the first Performance with the
Store Performance function. WK1 will automatically set to that Performance
this upon powering up.
COMMON AND CHORD CHANNELS
The main uses of the Common and the Chord Channel are:
•
simulating the entire
WK1
WK1
WK1
WK1
WK1
keyboard with a Master keyboard. The master
keyboard must transmit on the same channel as WK1 Common or Chord
Channels.
•••••
reserving a special track either in the sequencer or in another instrument for
the selection and control of Styles, Performances, Songs, panel functions
etc. In the external sequencer, a track is reserved for the control data
transmitted on the same MIDI channel assigned to
WK1
WK1
WK1
WK1
WK1
common or chord
channel.
To have access to COMMON and CHORD channels, refer to the “PRELIMINARY
OPERATIONS” chapter.
COMMON CHANNEL
Use this function to assign the MIDI channel to Common. The channel
assigned to Common is no longer available to receive notes from an
external device. Program and Control Change received on Common select
Styles, Songs, Song Styles, Effects and other functions described in the
“Appendix” at the end of the Owner’s Manual. The MIDI channel assigned
to Common can only receive data, as transmission on Common is
disabled. Press and hold the STORE PERFORMANCE key, then press
ENTER to store the current MIDI setting to the Performance.
Содержание WK1
