GEM genesys pro s, Дополнение к руководству

Страница: 17 / 24

assign the mute to a pad Page11
manual addendum genesys s
Assign the mute to a pad of the sequencer tracks
It is now possible to assign to one (or more) of the programmable pads the MUTE of any of the sequencer track, in
order to obtain a very powerful “Minus One” realtime function. Normally this function can be used to mute the lead
melody in a Song (track n. 4), but you can choose to mute any track of the sequencer (from 1 to 32).
1
Press the EDIT button in the programmable pads section. The edit page is shown on
the display.
2
Select the PAD to assign the mute function using the UP/DOWN CURSOR.
3
Once you have selected the PAD (n. 1 in this example), select the MUTE/DEMUTE
function by rotating the DIAL
The default mute channel is assigned to the #4 , the track and the relative Midi channel, where the
lead track is memorized usually.
5
Then Use the DIAL to modify the value. You can assign any of the sequencer track
from #1 to #32.
4
Move on the TRACK field using the RIGHT CURSOR to modify the track you want to
mute
The operation can be repeated selecting different programmable pads, in this way you can prepare
different buttons to realtime perform with the Song Player section.
The programmable pad set up can be stored in one of the internal MEMORIES or handled in
realtime using the LOCK function [F8] . Please refer to the relative section in the owner manual.