19 Declaration of Incorporation according to 2006/42/EC (Machinery Directive)
Declaration of Incorporation
according to the EC Machinery Directive 2006/42/EC, Annex II, 1.B for partly
completed machinery
We,
GEMÜ Gebr. Müller Apparatebau GmbH & Co. KG
Fritz-Müller-Straße 6-8
74653 Ingelfingen-Criesbach, Germany
declare that the following product
Make:
GEMÜ Motorized diaphragm valve
Serial number:
from 10th April 2019
Project number:
FE_130605
Commercial name:
GEMÜ 639
meets the following essential requirements of the Machinery Directive 2006/42/EC:
1.1.3, 1.1.8, 1.3., 1.3.4, 1.3.7, 1.3.8, 1.5.1, 1.5.2, 1.5.3, 1.5.5, 1.5.6, 1.5.7, 1.5.14, 1.5.15, 1.5.16, 1.6.1, 1.6.3, 3.2.1, 3.2.2, 3.3.4, 3.4,
3.4.2, 3.4.3, 3.4.5, 5.1, 5.2
We also declare that the specific technical documentation has been compiled in accordance with part B of Annex VII.
The manufacturer or his authorised representative undertake to transmit, in response to a reasoned request by the national au-
thorities, relevant information on the partly completed machinery. This transmission takes place:
Electronically
Authorised documentation officer
GEMÜ Gebr. Müller Apparatebau GmbH & Co. KG
Fritz-Müller-Straße 6-8
74653 Ingelfingen, Germany
This does not affect the industrial property rights!
Important note! The partly completed machinery may be put into service only if it was determined, where appropriate, that the
machinery into which the partly completed machinery is to be installed meets the provisions of this Directive.
Ingelfingen-Criesbach 2020-04-08
Joachim Brien
Head of Technical Department
www.gemu-group.com
64 / 67
GEMÜ 639 eSyStep
OPEN / CLOSE (Code AE)
19 Declaration of Incorporation according to 2006/42/EC (Machinery Directive)
