Geko 12V 4000 G 41 Скачать руководство пользователя страница 59

Страница: 59 / 124

Engine

6.1

Engine

6.1.1

Engine barring manually

Preconditions

Engine is stopped and starting disabled.

Special tools

Designation / Use

Part No.

Qty.

Barring tool

Ratchet

DANGER

Unguarded rotating and moving engine components.

Risk of serious injury

danger to life!

Before barring the engine, ensure that nobody is in the danger zone.

Barring engine manually

1. Remove protective plate.

2. Install barring tool (2).

3. Set ratchet (1) onto barring tool (2).

4. Rotate crankshaft in engine direction of rotation.

Apart from the normal compression resistance,

there should be no abnormal resistance.

5. For barring-tool removal follow reverse sequence

of working steps.

6.1.2

Engine barring with starting system

Special tools

Designation / Use

Part No.

Qty.

Connector pliers

DANGER

Unguarded rotating and moving engine components.

Risk of serious injury - danger to life!

Before barring or starting the engine, ensure that nobody is in the danger zone.

After working on the engine, check that all protective devices have been reinstalled

and all tools removed from the engine.

M015403/00E 02-09

www.generent.ru

Содержание 12V 4000 G 41





























































































































Результаты поиска

Содержание 12V 4000 G 41

Отзывы:

Бренды по названию

Популярные бренды

Geko 12V 4000 G 41, Руководство по эксплуатации

Результаты поиска

Содержание 12V 4000 G 41

Отзывы:

Бренды по названию

Популярные бренды