GEKKO Thermasgard 4277, Руководство пользователя

Страница: 5 / 8

5
Connection via Interface
RS485 RIO-29
Set the desired address.
The bus address in the range of 0 to 127 (binary format) can be adjusted with the left DIP switch (pos.
1 to 7). All remaining DIP switches (pos. 8 as well as pos. 1 to 8 from the right DIP switch) are set to
OFF. If multiple temperature sensors are used addresses may not be assigned twice.
The room temperature sensor THERMASGARD
4277 is connected to the RS485 interfaces of the
RIO-29 modules. You can attach a maximum of 128
controllers on the same interface.
Bus adress
Connection at myGEKKO
myGEKKO RIO 29
Art. Rio-29
LED for power supply Expansion port for
LED display
Temperature cor-
rection
Humidity correction
Reset
Communication LED
Temperature sensor Humidity/temperature sensor
Supply terminal
Bus address
Bus terminal
Bus termination
Bus parameters
(baud rate, data bits,…)