Upgradeable PDU Instruction Manual
56
© 2017 Geist
GM1157
cleared and reset. The Repeat interval can be up to 14400 seconds (4 hours). A Repeat of 0
disables this feature, and only one notification will be sent.
Then, click
Save
to save this notification Action.
More than one Action can be set for an Alarm or Warning; to add multiple Actions, just click the Add
icon again and set each one as desired. Each alert can have up to 32 Actions associated with it.
To change an existing Alarm or Warning Event:
Click the Modify icon next to the Alarm or Warning Event you wish to change, then modify its settings
as above.
Figure 3-23
Modify Action Page
Once an Action has been added, each Action has its own checkbox in the "enabled" column at the far
left. The default is unchecked (disabled) when you first add each Action; set the checkbox to enable it.
This allows you to selectively turn different Actions on and off for testing.
To delete an existing Alarm or Warning Event:
Click the Delete icon next to the Alarm or Warning Event you wish to change, then click
Delete
to
confirm.
Figure 3-24
Delete Action Page
3. When finished, click
Save
to save this Alarm or Warning event.