2
Gerhard Geiger GmbH & Co. KG | 100W1636
0818
V000
en
EN
EN
1. General information
Dear customer,
By purchasing a GEIGER Remote AIR handheld transmitter you have decided on a quality
product from GEIGER.
Thank you very much for your decision and the confidence placed in us.
2. Guarantee
In the case of incorrect installation contrary to the operating instructions and/or constructional
modification, the legal and contractual guarantee for property damage and product liability
lapses.
3.
Handheld transmitter specific safety information
Please observe following instructions in order to avoid damage to this product:
f
Avoid impacts.
f
Do not drop the device.
f
Do not immerse in water or any liquid. Ensure protection against splashing water.
f
Never use cleaning agents or abrasive solvents. Clean the surface of the transmitter
with a damp cloth.
4.
Scope of delivery
• Handheld transmitter
•
Battery type button cell CR2032 (not installed)
• Quick start guide
5.
Remote AIR transmitter / Assignment of keys
No. Function
1
Channel and sun automatic display light (yellow)
Channel 1: 1 x short flash
Channel 2: 2 x short flash
Channel 3: 3 x short flash
Sun automatic: 1 x long flash
2
STOP key
3
Channel selection key RIGHT
4
UP key
5
Channel selection key LEFT
6
DOWN key
6.
Insert/remove/replace battery
Remove the cover on the back of the handheld transmitter with
a coin (turn counter clockwise) and insert the supplied battery or
a new one. To close, put the cover back with a coin in clockwise
direction.
If the display doesn‘t light up if actuating one of the control keys, the batteries need to be
replaced. Please use the same type of battery (CR2032).
7.
Learning the handheld transmitter with a GEIGER motor
Please refer to the operating instructions of the motor for the learning of the handheld trans-
mitter with the motor and the setting of the end stops.
I
The handheld transmitter Remote AIR cannot be connected with the
Loxone Smart Home control.
