
2
Gerhard Geiger GmbH & Co. KG | 100W1583
1217
V001
en
EN
EN
1. General information
Dear customer,
By purchasing a GEIGER motor you have decided on a quality product from GEIGER.
Thank you very much for your decision and the confidence placed in us.
Before you put this drive into operation please observe the following safety instructions. It
serves for the prevention of danger and for the avoidance of personal injury and damage to
property.
The installation and operating instructions contain important information for the installer, the
specialist electrician and the user. Please pass on these instructions if you transfer the product.
These instructions should be kept by the user.
2. Guarantee
In the case of incorrect installation contrary to the installation and operating instructions and/
or constructional modification, the legal and contractual guarantee for property damage and
product liability lapses.
3. Intended use
The motors of the model range
GJ56.. E11-1001
with electronic end stop are designed
exclusively for the operation of the STOBAG RIVERA terrace shading.
The motors may not be used for the operation of roller grilles, garage doors, furniture and lifting
tools.
Index
1. General information ............................................................................2
2. Guarantee .............................................................................................2
3. Intended use ........................................................................................2
4. Safety instructions ..............................................................................3
5. Safety instructions for assembly .......................................................3
6. Installation instructions ......................................................................4
7. Information for the specialist electrician ..........................................5
8. Setting of the end stops .....................................................................5
9. Activate the programming mode ......................................................6
10. Programming/changing the upper end stops ...................................6
11. Resetting to factory settings ..............................................................6
12. Obstacle detection and anti-freeze protection .................................6
13. What to do if… .....................................................................................7
14. Maintenance .........................................................................................7
15. Technical data ......................................................................................7
16. Notes on waste disposal ....................................................................7
17. Declaration of conformity ...................................................................8