2
Table of Contents
1 Introduction........................................................................................................................................3
2 Safety instructions .............................................................................................................................3
3 Specified application..........................................................................................................................3
4 Installation and connection................................................................................................................4
4.1
Mounting information..............................................................................................................4
4.2
Connection diagram GFM001................................................................................................4
5 First start-up and commissioning ......................................................................................................4
6 Control functions................................................................................................................................5
6.1
Manual operating functions....................................................................................................5
6.2
Automatic operating functions................................................................................................5
7 Extensions and individual settings ....................................................................................................6
7.1. Learning of radio commands .................................................................................................6
7.2
Coding set in the condition as delivered................................................................................6
7.3
Learning of the coding of a hand-held transmitter .................................................................6
7.4
Learning of a sensor ..............................................................................................................7
7.5
Learning of intermediate positions .........................................................................................7
7.6
Cancelling of intermediate stop positions ..............................................................................7
7.7
Interchanging of the relay assignments .................................................................................8
7.8
Cancelling of all learned settings and codes .........................................................................8
8 Audible signals emitted by the control for fault diagnosis.................................................................8
9 Technical characteristics ...................................................................................................................9
10 Declaration of Conformity..................................................................................................................9
