GEIGER GFB00 Series, Оригинальная инструкция по сборке и эксплуатации

Страница: 5 / 8

5
www.geiger.de
EN
EN
12. Resetting the hand-held transmitter to the delivery state
To reset the hand-held transmitter to the delivery state, press the PAIR key for at least
30 seconds.
After 10 seconds, the status LED begins to flash quickly, after 20 seconds the status LED starts
to flash slowly and after 30 seconds the status LED turns off. The hand-held transmitter is reset
to the factory settings.
13. Changing the batteries
Replace the batteries as soon as the status LED no longer lights up when an operating key is
pressed. See chapter „Insert batteries“.
14. Technical data
Transmitting frequency 433,92 MHz
Transmission power 6 dBm
Temperature range
-0°C to +60°C
Protection class IP20
Batteries 2x LR03, Typ AAA
Dimensions 95 x 42 x 20 mm
Subject to technical modifications
15. Declaration of conformity
We herewith explicitly declare that this product complies with the essential requirements
and relevant directives. It is authorised for use in all EC member states and in Switzerland
without any need of prior registration. The Declaration of Conformity concerning this product is
available on our website: www.geiger.de
16. Disposal information
Disposal of packaging materials
Packaging materials are raw materials and can therefore be reused. In the interest of environ -
mental protection, please dispose of them properly.
Disposal of electrical and electronic equipment
According to the EU Directive, electrical and electronic equipment must be collected and
disposed of separately.