GEIGER GFB00 Series, Оригинальная инструкция по сборке и эксплуатации

Страница: 3 / 8

3
www.geiger.de
EN
EN
5. Overview GFB00.
6. Insert batteries
7. Initial commissioning
Teaching-in the first transmitter
1. Connect the drive to the power supply. The drive clicks (short UP and DOWN movement)
and starts in teach-in mode.
For multi-channel hand-held transmitters: Select the desired channel.
2. Press the UP and DOWN keys on the hand-held transmitter simultaneously until the drive
clicks. The hand-held transmitter and the drive are connected to each other.
Changing the rotation direction of the drive
1. Press the PAIR key for at least 5 seconds. The drive clicks.
2. Press the STOP key for at least 2 seconds. The drive clicks, the direction of rotation of the
drive has been changed.
Teaching-in another hand-held transmitter
1. Press the PAIR key for at least 5 seconds on the hand-held transmitter that has already been
programmed. The drive clicks.
2. Press the PAIR key on the new hand-held transmitter for at least 2 seconds.
The drive clicks, the new hand-held transmitter has been programmed.
PAIR key
Battery
compartment
Status LED
UP key
STOP key
DOWN key
Front view Rear view without
bottom part
230
V