Gehl PowerBox 1639, Руководство оператора

Страница: 21 / 66

Fig. 10 - Screed Adjustments On Screed (Right End Shown)
1.
Depth Adjust Screw
4.
Side Extension
2.
Side Shoe Adjust
5.
Side Shoe
3.
Crown Turnbuckles
6.
Depth Adjust Indicator
CLOCKWISE to increase the depth. Turn the Screws
COUNTER CLOCKWISE to decrease the depth. A
depth indicator on each end shows approximate adjust-
ment setting in inches of mat thickness. These indica-
tor numbers are only used as a reference. Actual mat
thickness must be measured with a Depth Gauge.
Crown Ajustment: This is made with two
Turnbuckles at the center of the Screed Platform.
Manually turn so screw ends push OUTWARD to
decrease the mat crown. Turn opposite so screw ends
feed INWARD to decrease the mat invert or valley.
Side Shoe Plate: Loosen Wing Nuts for adjustment
and re-tighten.
ACCESSORIES
NOTE:
All accessories are field installed unless
otherwise noted. Information and parts for field
installing of all of the accessories will be provided
by the Factory or GEHL Paver dealers.
Cut Off Plates & Baffles:
The following choice of
Cut Off Plates & Baffles are available and must be
ordered separate by stock number from following list:
Description Stock Number
6” (152.4mm) for left side 806356
6” (152.4mm) for right side 806357
12” (304.8mm) for left side 806358
12” (304.8mm) for right side 806359
18” (457.2mm) for left side 806360
18” (457.2mm) for right side 806361
24” (609.6mm) for left side 806362
24” (609.6mm) for right side 806363
30” (762mm) for left side 806364
30” (762mm) for right side 806365
36” (914mm) for left side 805460
36” (914mm) for right side 805461
Bolt On Screed Extension:
The following choice of
Extensions are available and must be ordered separate
by stock number below:
RACHET
HANDLE
3
1 6
4 5
2
907389/AP297
22
Printed In U.S.A.
Discount-Equipment.com